Siemens Launches Permanent Magnet-Based Gearless Wind Turbine

Siemens Launches Permanent Magnet-Based Gearless Wind Turbine

Progress in the development of commercially-viable direct drive wind turbines took a significant step forward last week, with the official launch by Siemens Energy of its SWT-3.0-101 wind turbine. This turbine has a faceplate rating of 3 MW, has no gearbox and uses a permanent magnet generator to produce electricity. What’s really interesting about this system is that according to Henrik Stiesdal, Chief Technology Officer for the Siemens WInd Power business unit, the turbine produces 25% more power than the Siemens 2.3 MW machine – but does so with less weight and only 50% of the parts! The nacelle which contains the machinery at the top of the tower, weighs just 73 tonnes. Because of its compact size, the nacelle can be transported using fairly standard vehicles.

Siemens direct drive permanent magnet generator wind turbine

The new 3.0 MW direct drive permanent magnet generator wind turbine from Siemens (image courtesy of Siemens Energy)

There has been much interest in the development of direct drive systems in recent years, since the elimination of the gear box theoretically the turbine system more reliable.  What Siemens appears to have done is to take that a step further – by eliminating half of the components at the top of the tower, there is less maintenance for the service technicians to have to worry about.  This is good for onshore systems, but even more valuable for wind turbines that are to be located offshore, far from land. It also means, in theory, more uptime for each turbine, thus allowing them to produce electricity over wider intervals.

Siemens installed the first prototype of the SWT-3.0-101 at the beginning of December 2009 close to the town of Brande in Denmark. Siemens entered the wind energy business through the acquisition of the Danish company Bonus Energy A/S approximately five years ago, a company that had been in business since 1980, as Danregn Vindkraft. This company was a pioneer in the early days of recent interest in wind power, and was a logical acquisition for Siemens as it looked to enter the market. The Siemens Wind Power business unit is still headquartered in Brande. The permanent magnet generator is being produced by the Large Drives business unit within the Siemens Industry Sector.

Siemens direct drive permanent magnet generator wind turbine

The compact nature of the nacelle for the new wind turbine from Siemens means that it is easier to transport than other systems (image courtesy of Siemens Energy)

Siemens first tested direct drive systems in the form of two 3.6 MW concept turbines in July 2008, leading to the 3.0 MW prototype installed late last year. While Siemens acknowledges that they were not the first to market with a direct drive permanent magnet generator system, the company appears to have deliberately taken its time with the development of its own systems. In a news release from late last year, Mr. Stiesdal indicated that rushing to the market with immature technology was not an option for Siemens. While the nacelle contains new technology, the blades, rotor hub, tower and controller were developed from existing products. Full commercial launch of the new turbine through serial production, is expected to commence next year, with a number of systems being installed around the world in the meantime.

One comment from Siemens is worthy of note for the permanent magnet industry and its supply chain. In a promotional video that was released to coincide with the launch of the new turbine, Ernst Frendesen, Director of Global Sales and Proposals for Siemens said that the

“market demand that we expect on this machine will be extremely big and therefore for a period, we think that the market demand will outweigh the production capacity.”

Attempts to ascertain the specific amount of permanent magnet materials used in SWT-3.0-101 turbine design were declined by the company for reasons of confidentiality. It is clear, however, that Siemens is putting the permanent magnet industry [and indirectly, the rare earths supply chain] on notice.

Siemens direct drive permanent magnet generator wind turbine

Schematic of the new 3.0 MW direct drive permanent magnet generator wind turbine from Siemens (image courtesy of Siemens Energy)

Mr. Stiesdal has kindly agreed to do an interview with me on the SWT-3.0-101 wind turbine and its direct drive, permanent magnet-based drive system, which I will post to Terra Magnetica once completed, along with any other developments in the area of DD PMG turbines as they happen.

[last updated August 9, 2010, to correct text of Mr. Frendesen’s quote from promotional video].

, ,

This post was written by:

- who has written 67 posts on Terra Magnetica.

Gareth is a Founding Principal at Technology Metals Research, LLC. He has expertise in a variety of magnetic materials, devices and applications, and their associated trends and challenges, particularly for renewable energy production. For more information check out his biography page. Don't forget to check out Terra Magnetica at Twitter too.

Contact the author

34 Responses to “Siemens Launches Permanent Magnet-Based Gearless Wind Turbine”

  1. snpatil Says:

    respected sir ,
    as ur companies reputation is very vast in market and very big name.
    we welcomes u in indian for ur wind power proposal . as in india mharasthtra is having very good wind potential site . we have very good land available for wind power project where u can invest . so plz give us feed back and visit site also.Already 3000 wind mills are running sucessfully in this site. and from 1998 225 to 2010 sep 2010 .2mw machines has been installed.
    so plz give us positve ffeed back.

    best regards
    mobile no;-08805256278
    mobile no;-09882072938
    email id ;-

  2. Ronald J. Ortela Says:

    Will Siemens utilise the C-Gen technology of NGenTec for producing 6 MW wind turbines after 2012 ( Utilities Curacao N.V. have plans to install two “wind farms” in Curacao, each of 20 wind turbines (6MW).

  3. Eric Says:

    Hello. Our company, Shandong Swiss Electric Co., Ltd, supplying a chain services from design, development, production to sales, installation and maintenance.

    If you have any questions about wind farm or wind turbine, let us discuss.


  4. charanthej Says:

    Hi Mr. Eric,

    I am Charanthej.B from the Alternative Energy division of GlobalData, an international premium business information and analysis firm.

    I have gone through your website, there I find as Shandong Swisselectric manufactures 1.5 MW, 2.0 MW, 3.0 MW, 6.0 MW, 10.0 MW turbines. Could you please tell me the 6.0 MW and 10.0 MW wind turbines are onshore or offshore ?


  5. mcm ?? Says:



  1. […] The rest is here: Siemens Launches Permanent Magnet-Based Gearless Wind Turbine … […]

  2. […] original here: Siemens Launches Permanent Magnet-Based Gearless Wind Turbine … By admin | category: direct, direct supply | tags: direct, direct supply, […]

  3. […] Siemens Launches Permanent Magnet-Based Gearless Wind Turbine – The new 3.0 MW direct drive permanent magnet generator wind turbine from Siemens (image courtesy of Siemens Energy)… […]